Remote Control Unit - Denon AVC-X4800H Owner's Manual

Contents Connections
Remote lock function
When connecting an IR receiver, enable the Remote lock function. When
the function is enabled, you can not perform operations with the remote
control unit.
By default, this function is disabled.
X
INFO Cursor Up
STATUS Cursor Down
Front panel Display
Playback
Disabling the sensor function of the

remote control unit

1
ENTER
2
3
Enabling the remote sensor function
1
2
3
141
Rear panel
Settings Tips
Press X while you press and hold STATUS and INFO
with the unit in standby mode.
Use cursor Up/Down to select "RC LOCK On".
Press ENTER to enter the setting.
The infrared light receiving function is disabled.
Press X while you press and hold STATUS and INFO
with the unit in standby mode.
Use cursor Up/Down to select "RC LOCK zOff".
(z The currently set mode.)
Press ENTER to enter the setting.
Infrared light receiving function on the main unit is enabled.
Remote Index
Appendix