Denon AVR-2802 Operating Instructions Manual page 37

TM
DTS-ES Extended Surround
DTS-ES Extended Surround is a new multi-channel digital signal format developed by Digital Theater Systems
Inc. While offering high compatibility with the conventional DTS Digital Surround format, DTS-ES Extended
Surround greatly improves the 360-degree surround impression and space expression thanks to further expanded
surround signals. This format has been used professionally in movie theaters since 1999.
In addition to the 5.1 surround channels (FL, FR, C, SL, SR and LFE), DTS-ES Extended Surround also offers the
SB (Surround Back, sometimes also referred to as "surround center") channel for surround playback with a total
of 6.1 channels. DTS-ES Extended Surround includes two signal formats with different surround signal recording
methods, as described below.
TM
DTS-ES Discrete 6.1
2
DTS-ES Discrete 6.1 is the newest recording format. With it, all 6.1 channels (including the SB channel) are
recorded independently using a digital discrete system. The main feature of this format is that because the
SL, SR and SB channels are fully independent, the sound can be designed with total freedom and it is
possible to achieve a sense that the acoustic images are moving about freely among the background sounds
surrounding the listener from 360 degrees.
Though maximum performance is achieved when sound tracks recorded with this system are played using
a DTS-ES decoder, when played with a conventional DTS decoder the SB channel signals are automatically
down-mixed to the SL and SR channels, so none of the signal components are lost.
TM
2 DTS-ES Matrix 6.1
With this format, the additional SB channel signals undergo matrix encoding and are input to the SL and SR
channels beforehand. Upon playback they are decoded to the SL, SR and SB channels. The performance
of the encoder used at the time of recording can be fully matched using a high precision digital matrix
decoder developed by DTS, thereby achieving surround sound more faithful to the producer's sound design
aims than with conventional 5.1- or 6.1-channel systems.
In addition, the bit stream format is 100% compatible with conventional DTS signals, so the effect of the
Matrix 6.1 format can be achieved even with 5.1-channel signal sources. Of course it is also possible to play
DTS-ES Matrix 6.1 encoded sources with a DTS 5.1-channel decoder.
When DTS-ES Discrete 6.1 or Matrix 6.1 encoded sources are decoded with a DTS-ES decoder, the format
is automatically detected upon decoding and the optimum playing mode is selected. However, some Matrix
6.1 sources may be detected as having a 5.1-channel format, so the DTS-ES Matrix 6.1 mode must be set
manually to play these sources.
(For instructions on selecting the surround mode, see page 25.)
The DTS-ES decoder includes another function, the DTS Neo:6 surround mode for 6.1-channel playback of
digital PCM and analog signal sources.
TM
2 DTS Neo:6 surround
This mode applies conventional 2-channel signals to the high precision digital matrix decoder used for DTS-
ES Matrix 6.1 to achieve 6.1-channel surround playback. High precision input signal detection and matrix
processing enable full band reproduction (frequency response of 20 Hz to 20 kHz or greater) for all 6.1
channels, and separation between the different channels is improved to the same level as that of a digital
discrete system.
DTS Neo:6 surround includes two modes for selecting the optimum decoding for the signal source.
• DTS Neo:6 Cinema
This mode is optimum for playing movies.
performance to achieve the same atmosphere with 2-channel sources as with 6.1-channel sources.
This mode is effective for playing sources recorded in conventional surround formats as well, because the
in-phase component is assigned mainly to the center channel (C) and the reversed phase component to
the surround (SL, SR and SB channels).
• DTS Neo:6 Music
This mode is suited mainly for playing music. The front channel (FL and FR) signals bypass the decoder
and are played directly so there is no loss of sound quality, and the effect of the surround signals output
from the center (C) and surround (SL, SR and SB) channels add a natural sense of expansion to the sound
field.
Decoding is performed with emphasis on separation
System setup items and default values (set upon shipment from the factory)
System setup
Input the combination of speakers in your system and their
Speaker corresponding sizes (SMALL for regular speakers, LARGE for
Configuration full-size, full-range) to automatically set the composition of the
signals output from the speakers and the frequency response.
q
Crossover Set the frequency (Hz) below which the bass sound of the
Frequency various speakers is to be output from the subwoofer.
Subwoofer This selects the subwoofer speaker for playing deep bass
mode signals.
SB CH Auto Set the method of playing the surround backchannel for digital
w
Flag Detect signals.
This parameter is for optimizing the timing with which the
e
Delay Time audio signals are produced from the speakers and subwoofer
according to the listening position.
This adjusts the volume of the signals output from the speakers
r
Channel Level and subwoofer for the different channels in order to obtain
optimum effects.
Input
source
Digital In This assigns the digital input jacks for the different
t
Assignment input sources.
Digital
Inputs
This sets whether or not to display the on-screen display that
On Screen
y
appears on the monitor screen when the controls on the remote
Display
control unit or main unit are operated.
Auto Tuner FM stations are received automatically and stored in the
u
Preset memory.
Default settings
Front Sp. Center Sp. SubWoofer Surround Sp. Surround Back Sp.
Large Small Yes Small Small / 1spkr
80 Hz
LFE
DTS-ES / 6.1 Source Auto Flag Detect Mode = OFF
Front L & R Center Sub Woofer Surround L & R Surround Back
3.6 m (12 ft) 3.6 m (12 ft) 3.6 m (12 ft) 3.0 m (10 ft) 3.0 m (10 ft)
Surround Surround Surround
Front L Front R Center Subwoofer
L R Back
0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB
CDR
CD DVD TV/DBS VDP VCR-1 VCR-2
/TAPE
OPTICAL OPTICAL OPTICAL
COAXIAL OFF OFF OFF
1 2 3
On Screen Display = ON
A1 ~ A8 87.5 / 89.1 / 98.1 / 108.0 / 90.1 / 90.1 / 90.1 / 90.1 MHz
B1 ~ B8 522 / 603 / 999 / 1404 / 1611 kHz, 90.1 / 90.1 / 90.1 MHz
C1 ~ C8 90.1 MHz
D1 ~ D8 90.1 MHz
E1 ~ E8 90.1 MHz
ENGLISH
—
—
—
—
37