Installing Adaptec Scsi Raid Software; Microsoft Windows 2000; Power Management With Windows 2000 - HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade User Manual

Installing Adaptec SCSI RAID Software

Microsoft Windows 2000

The following sections describe procedures for installing Adaptec SCSI RAID
controllers under Windows 2000. Two installation scenarios are described in this
chapter:
•
Installing on a new system
•
Adding to an existing system
IMPORTANT: The driver for Windows 2000 does not include a digital signature. You may
receive one or more warning messages about this condition. Bypass the warnings and
continue with the installation. The driver will function normally when the upgrade or install is
complete.
It is necessary to make adjustments to certain Adaptec 2100S RAID Controller setups
to ensure uninterrupted service. This document describes these setups and presents
corrective action.

Power Management with Windows 2000

Under Windows 2000, it is recommended that you disable Power Options while the
Adaptec 2100S RAID Controller is building, rebuilding, or being verified. Otherwise,
when the system enters Standby or Hibernate Mode, the Adaptec 2100S RAID
Controller operation will stop.
HP 2100S SCSI RAID Controller User Guide
4
4-1