HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade User Manual page 48

Hp 2100s scsi raid controller
Hide thumbs Also See for P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade:
Table of Contents

Advertisement

Troubleshooting
Problem 17
The floppy disk drive cannot be accessed after installing an Adaptec controller.
Solution 17
Use SMOR to enable the EBDA Relocation option.
Problem 18
The controller's audible alarm is sounding during normal operation.
Solution 18
This indicates a drive has failed. Restart the host system and run SMOR to identify
the failed drive. The alarm will stop when SMOR finishes the initial system scan.
Replace the failed drive and start a rebuild operation for the array.
C-10
HP 2100S SCSI RAID Controller User Guide

Advertisement

Table of Contents
loading

Table of Contents