Problems With Automatic Two-Sided Printing - Xerox 8200B - Phaser Color Solid Ink Printer Advanced Features And Troubleshooting Manual

Problems with automatic two-sided printing

Output is single-sided
Make sure that you have selected two-sided printing in the printer driver.
I
Use Letter-size, A4-size, or Legal-size paper only for two-sided printing.
I
If using the standard paper/transparency tray, make sure the tray switch is set to
I
Paper.
Frequent jams with two-sided printing
Paper must be between 60 - 120 g/m
I
When using the manual-feed slot, make sure that the paper is loaded straight and
I
aligned along the left side of the manual-feed slot.
The second side of a two-sided print is upside-down
Select the correct method for binding preference in the printer driver.
I
Refer to the Phaser 8200 Color Printer User Guide for more information on two-sided
I
printing and binding preference.
Letterhead paper prints on the wrong side or prints upside-down
From the manual-feed slot: For two-sided printing, load letterhead paper face up
I
with the letterhead entering the manual-feed slot last.
From a tray: For two-sided printing, load letterhead paper face down with the
I
letterhead towards the back of the tray.
Advanced Features and Troubleshooting Manual
2 (16 - 32 lb. bond) in weight.
Troubleshooting
52