Protected Mode For The Front Panel Menus - Xerox 8200B - Phaser Color Solid Ink Printer Advanced Features And Troubleshooting Manual

Printer Management

Protected mode for the front panel menus

You can have the printer enter "protected mode" to prevent users from changing front
panel settings that may impact the prints of other users. Instead, users select printing
features, such as color corrections, through the printer drivers only. In protected mode,
users can access all menus except the
Menu.
Note
You can temporarily override protected mode. Enter the menu system
(by highlighting
key or Scroll Up key, and press the Back key. You can then access the
Setup Menu
as soon as you exit the menu.
There are two methods for entering/exiting protected mode:
Using CentreWare IS Printer Management software
I
Using utility files
I
To enter/exit protected mode using CentreWare IS Printer Management software:
From your printer's Internet Services home page, click Properties.
1.
On the left side of the Properties page in CentreWare IS, click Printer Defaults.
2.
3. If desired, change the setting for Front Panel Menus (under User Preferences on the
Printer Defaults page).
Select Off to have the front panel display all menus.
I
Select On to limit the menu items displayed on the front panel,
I
4. Click the Save Changes button on the bottom of the page.
To enter/exit protected mode using utility files:
To enter or exit protected mode, download one of the following utility files:
Macintosh:
I
Menu Short — limits menu access
I
Menu Long — expands menus
I
Refer to page 40 for downloading instructions.
PC:
I
MENUSHRT.PS — limits menu access
I
MENULONG.PS — expands menus
I
Refer to page 42 for downloading instructions.
32
Printer Setup Menu
and pressing the OK key), hold down either the Cancel
Menus
or the
Network Setup
and the
Network Setup
Menu. These two menus are hidden again
Phaser 8200 Color Printer
Printer