Printer Management; Centreware Is Software - Xerox 8200B - Phaser Color Solid Ink Printer Advanced Features And Troubleshooting Manual

Printer Management

Printer Management
You can configure and manage your printer:
On the front panel
I
Using CentreWare Internet Services™ (IS) software
I
Through Usage Profile Reports, which can be emailed when the printer needs
I
attention (such as needing more paper)
This section covers the following features related to the operation of your printer:
The printer's Startup Page — see page 31.
I
Protected mode for the front panel menus — see page 32.
I
Sys/Start Job execution — see page 33.
I
Manual feed timeout — see page 35.
I
Front panel intensity — see page 35.
I
Front panel contrast — see page 36.
I
Intelligent Ready mode — see page 36.
I
Front panel language — see page 37.
I
Automatic tray switching — see page 37.
I

CentreWare IS software

CentreWare IS software is a printer management tool that uses a web browser to connect to
the printer and gather printer information:
Job status
I
Job accounting
I
Printer usage
I
Routine troubleshooting
I
Configuration of printer settings
I
CentreWare IS requires a TCP/IP connection and an internal hard drive. To view
information on your printer, enter your printer's IP address as the URL in a web browser.
For example, if your printer's IP address is 113.25.72.34, the URL would be
http://113.25.72.34. The CentreWare IS interface appears on your computer's screen.
This feature is only available on the following models: The Phaser 8200N Color Printer,
the Phaser 8200DP Plus Color Printer, and the Phaser 8200 DX Extended Feature Color
Printer.
For detailed information on CentreWare IS software, refer to its online help. You can
access interactive troubleshooting assistance with PhaserSMART by selecting
Technical Support from the Troubleshooting tab.
28 Phaser 8200 Color Printer