Control Panel Error Messages; Messages About Supplies - Xerox Phaser 6180 User Manual

Control Panel Error Messages

This section describes the messages displayed on the control panel.

Messages About Supplies

Message
010-351
Replace Fuser
010-359
Fuser ID Error
010-317
Insert Fuser
093-NNN
XXX Cart. Error
093-NNN
Check XXX Cart
093-NNN
XXX Cart. Error
094-320
Transfer Unit Error
Install XXX
Print Cartridge
Install
Transfer Unit
Ready to Print
XXX Cartridge
Replace Soon
Ready to Print
Replace(010-421)
Condition/Reason/Action
Time to replace the fuser.
Replace the old fuser with a new one.
The fuser is not installed correctly or is not working correctly due
to damage or malfunction.
Reinstall the fuser.
The fuser is not installed.
Install the fuser.
The XXX print cartridge is not installed correctly or is not working
correctly due to damage or malfunction.
Reinstall the print cartridge.
Sealing tape is still attached to the XXX print cartridge.
Remove the sealing tape from the displayed print cartridge.
The XXX print cartridge is not installed correctly or is not working
correctly due to damage or malfunction.
Reinstall the print cartridge.
See Checking/Managing the Printer with CentreWare IS
page 8-5.
The transfer unit is not installed correctly or is not working
correctly due to damage or malfunction.
Reinstall the transfer unit.
The XXX print cartridge is not installed.
Install the XXX print cartridge.
See Checking/Managing the Printer with CentreWare IS
page 8-5.
The transfer unit is not installed.
Install the transfer unit.
The XXX print cartridge is nearly empty.
Purchase a new print cartridge.
See Checking/Managing the Printer with CentreWare IS
page 8-5.
It is nearly time to replace the fuser.
Purchase a new fuser.
Phaser® 6180 Color Laser Printer
7-21
Control Panel Error Messages
on
on
on