Xerox 8200B - Phaser Color Solid Ink Printer Advanced Features And Troubleshooting Manual page 40

Printer Management
To turn on/turn off the execution of the SysStart job from the printer's front panel:
1. highlighted, press the OK key.
With
Menus
2.
Scroll to
Printer Setup Menu
Press the OK key.
3.
4. Scroll to
Startup
5. To change the setting, press the OK key.
6. To make the change take affect, reset the printer.
To turn on/turn off the execution of the SysStart job using CentreWare IS Printer
Management software:
From your printer's Internet Services home page, click Properties.
1.
2. On the left side of the Properties page in CentreWare IS, click Printer Defaults.
3. If desired, change the setting for System Start Job (under User Preferences on the
Printer Defaults page).
4. Click the Save Changes button on the bottom of the page.
5. To make the change take affect, reset the printer.
To turn on/turn off the execution of the SysStart job using utility files:
Macintosh:
I
Set SysStart Job — Turns on automatic execution of the SysStart job
I
No SysStart Job — Turns off automatic execution of the SysStart job
I
Refer to page 40 for downloading instructions.
To make the change take affect, reset the printer.
PC:
I
SYSTART.PS — Turns on automatic execution of the SysStart job
I
NOSYSTRT.PS — Turns off automatic execution of the SysStart job
I
Refer to page 42 for downloading instructions.
To make the change take affect, reset the printer.
34
by pressing the Scroll Up or Scroll Down key.
Mode. The end of the line also displays the setting (On or Off).
Phaser 8200 Color Printer