Xerox 8200B - Phaser Color Solid Ink Printer Advanced Features And Troubleshooting Manual page 56

Maintenance drawer (A) locked
The maintenance drawer (labeled A) is locked because it contains hot ink that could
I
cause burns. You cannot remove the maintenance drawer until the ink has cooled.
Close the front cover and wait at least five minutes for the ink to cool before removing
I
the maintenance drawer from the printer.
Printing resumes when the maintenance drawer is unlocked and the cover is closed.
I
Maintenance drawer (A) missing
If the maintenance drawer is not installed, open the front cover and install the
I
maintenance drawer (labeled A).
If the maintenance drawer is already there, pull out the drawer, make sure that the
I
counter (orange piece labeled C2) is installed, and re-insert the maintenance drawer.
Maintenance kit low
The Maintenance Kit is almost empty.
I
Order a replacement Maintenance Kit since the Maintenance Kit will need replacing
I
soon. See the web site:
www.xerox.com/officeprinting/8200supplies
Maintenance kit empty
The Maintenance Kit is depleted. Replace the Maintenance Kit to continue printing.
I
If the message remains after you installed a new kit, make sure that the new counter
I
(the orange piece labeled C2) was correctly installed.
Maintenance kit service life low
The 15-month service life will expire soon.
I
Order a replacement Maintenance Kit since the Maintenance Kit will need replacing
I
soon. See the web site:
www.xerox.com/officeprinting/8200supplies
Maintenance kit service life expired
The 15-month service life has expired.
I
Replace the Maintenance Kit now to prevent print quality problems.
I
Printer error ##
An error occurred that may not be user-correctable.
I
Turn off the printer, wait at least 15 seconds, and then turn the printer back on.
I
If the error is not cleared, write down the error number.
I
Access interactive troubleshooting assistance with PhaserSMART from the
I
Technical Support link on the Troubleshooting tab.
If you have access to the internet, look up the error number on the infoSMART
I
web page (see page 47) for possible corrective action.
If the error persists, call Customer Support with the error number.
I
Advanced Features and Troubleshooting Manual
Troubleshooting
50