Parameter
eap {tls|ttls|leap|peap} {chap|msc-
hap|mschapv2|pap|md5|tls}
username "character string"
username2 "character string"
domain "character string"
password "character string"
srvcert {on|off}
imca {on|off}
srvid "character string"
Value configured
You can specify the EAP authentication type.
tls: EAP-TLS (default)
ttls: EAP-TTLS
leap: LEAP
peap: PEAP
chap, mschap, mschapv2, pap, md5, or tls are settings
for the phase 2 method, and must be set when using
EAP-TTLS or PEAP.
Do not make these settings when using other EAP au-
thentication types.
If you select EAP-TTLS, you can select chap, mschap,
mschapv2, pap, or md5.
If you select PEAP, you can select mschapv2 or tls.
You can specify the login user name for the Radius
server.
Usable characters: ASCII 0x20-0x7e (31 bytes) other
than "@". The default is blank.
You can specify the phase 2 username for EAP-TTLS/
PEAP phase 2 authentication.
Usable characters: ASCII 0x20-0x7e (31 bytes) other
than "@". The default is blank.
You can specify the login domain name for the Radius
server.
Usable characters: ASCII0x20-0x7e (31 bytes) other
than "@". The default is blank.
You can specify the login password for the Radius
server.
Usable characters: ASCII 0x20-0x7e (128 bytes). The
default is blank.
You can set the server certificate. The default is "off".
You can enable or disable the certificate when the in-
termediate certificate authority is present. The default
is "off".
You can set the server ID and subdomain of the certif-
icate server.
Remote Maintenance by telnet
2
91