Ricoh Aficio MP W3600 Network Manual page 103

Network guide
Hide thumbs Also See for Aficio MP W3600:
Table of Contents

Advertisement

Messages
Error: PDL
Error: Rem. Certificate Renewal An error has occurred in the remote sever renewal.
Error: USB Interface
Error: Wireless Board
Error: Wireless Card
Full: Hole Punch Receptacle
Full: Waste Toner
Hex Dump Mode
In Use: Copier
In Use: Finisher
In Use: Input Tray
Independent-supplier Toner
Key Card not inserted
Key Card/Counter not inserted The machine is waiting for key card or key counter to be inserted.
Key Counter not inserted
Loading Toner...
Low: Black Toner
Low: Toner
Malfunction: Finisher
Malfunction: Output Tray
Malfunction: Punch Unit
Memory Low: Copy
Memory Low: Data Storage
Memory Low: Scanning
Miscellaneous Error
Mismatch: Paper Size
Mismatch: Paper Size and Type Indicated paper tray does not contain paper of selected size and type.
Mismatch: Paper Type
Near Replacing: Black PCU
Near Replacing: Develop. Unit K Prepare the new development unit (black).
Near Replacing: Fusing Unit
Nearly Full: Waste Toner
No Paper: Selected Tray
Not Detected: Black Toner
Getting Printer Information over the Network
An error has occurred in the page description language.
An error has occurred in the USB interface.
A wireless board error has occurred.
Wireless card is not inserted during start up, or the IEEE 802.11b
interface unit or the wireless card is taken out after start up .
Punch Chip receptacle for hole punch is full.
Waste toner is full.
It is a hex dump mode.
The copier is being used.
Other functions is using Finisher.
Other functions is using the input tray.
Toner that is not recommended is set.
The machine is waiting for key card to be inserted.
The machine is waiting for key counter to be left in it.
Toner is being supplied.
The black toner cartridge is not set correctly, or toner is almost
running out.
The toner cartridge is not set correctly, or toner is almost running out.
There is a problem with the finisher.
There is a problem with the output tray.
There is a problem with the punch unit.
Memory shortage has occurred while the copy was operating.
Memory shortage has occurred while the document was being
accumulated.
Memory shortage has occurred while the scanner was working.
Other error has occurred.
Indicated paper tray does not contain paper of selected size.
Indicated paper tray does not contain paper of selected type.
Prepare the new black photoconductor unit.
Prepare the new fusing unit.
Waste toner bottle is nearly full.
There is no paper in specified tray.
Black toner is not correctly set.
Description
2
95

Advertisement

Table of Contents
loading

This manual is also suitable for:

W3600

Table of Contents