Ipv6; Lpr - Ricoh Aficio MP W3600 Network Manual

Monitoring and Configuring the Printer

ipv6

Use the "ipv6" command to display and configure IPv6 settings.
❖ View Setting
msh> ipv6
2
❖ IPv6 stateless address
msh> ipv6 stateless {on|off}
If "on" is selected, IPv6 requests information required for maintaining state-
ful connection to the router for as long as the printer power is turned on. This
setting allows information from the router to be obtained constantly, and pe-
riodically refreshes the effective period of the stateless address.

lpr

Use the "lpr" command to view and configure LPR settings.
❖ View Setting
msh> lpr
❖ Checking host name when deleting the job
msh> lpr chkhost {on|off}
If "on" is selected, you can delete print jobs only from the IP address of the
host that sent the print job. If LPR is disabled, you can also delete print jobs
sent from IP addresses other than that of the host.
❖ Printer Error Detection Function
lpr prnerrchk {on|off}
If you set this to "on", the printer stops receiving data and will wait until the
error is resolved before continuing processing a job.
74