Ricoh Aficio MP W3600 Network Manual page 32

Using a Printer Server
R
Select the printer created.
S
Press the {Insert} key to select a queue serviced by the printer.
You can select several queues.
T
1
Follow the instructions on the screen to make other necessary settings.
Following these steps, check that the queues are assigned.
U
Press the {Esc} key until "Exit?" appears, and then select [Yes] to exit
PCONSOLE.
V
Start the print server by entering the following from the console of the Net-
Ware server.
If the print server is in operation, quit and restart it.
• To quit
CAREE: unload pserver
• To start
CAREE: load pserver print_server_name
Note
❒ If the printer works as configured, the message "Waiting for job" appears.
Setting up using Web Image Monitor
A
Open a Web browser, and then enter "http://(printer's address)/" in the address
bar. Top Page of Web Image Monitor appears.
B
Click [Login].
A dialog box for entering the [Login User Name] and [Login Password] appears.
C
Enter the login user name and password, and then click [Login].
For details about the login user name and password, consult your network
administrator.
D
Click [Configuration] in the left area, and then click [NetWare].
E
Confirm the settings, and then click [OK].
Configuration is now complete. Wait several minutes before restarting Web
Image Monitor.
F
Click [Logout].
Note
❒ If you cannot identify the printer you want to configure, check the printer
name against the configuration page printed from the printer. For details
about printing a configuration page, see Printer Reference.
❒ If no printer names appear in the list, match the frame types of IPX/SPXs
for the computer and printer. Use the [Network] dialog box of Windows to
change the frame type of the computer.
❒ For details about the login user name and password, see Security Reference.
24