Maintenance
• Changing light bulb
Warning
1
Loosen the screw with a "+"
screw driver of your own,
and take off the face cover
in the direction of the arrow.
2
Turn the light bulb counterclockwise as
the arrow in the diagram and remove.
3
Turn the new light bulb clockwise to
install.
Note: Contact your distributor or the
service center listed on the
last page of this Instruction
Manual to purchase a light
bulb for the SP20 series.
4
Always reinstall the face cover after
replacing the light bulb.
Before changing the light bulb, remove the power
plug from the outlet and wait until the bulb cools.
Not doing so could cause a burn or electric shock.
Screw
Face cover
47