Pulling Up The Lower Thread - Toyota SP20 Series Instruction Manual

Sewing preparations

• Pulling up the lower thread

1
Hold the end of the thread, turn the
handwheel towards yourself for one
full turn, and then stop when the
needle is at its highest position.
Note: Always turn the handwheel towards yourself (in the direction of
the arrow). If you turn it in the wrong direction it could tangle the
thread.
Note: If the thread is tight the lower thread will not come out, so hold the
thread loosely.
2
Pull up the upper thread and the loop of
the lower thread will come out.
Pull out this lower thread.
3
Align the upper thread and lower thread,
and thread through the groove of the
presser foot.
Pull back about 15 cm.
22
Handwheel
Upper thread
Lower thread
15cm