Sewing; Straight Stitching And Reverse Sewing - Toyota SP20 Series Instruction Manual

Sewing

• Straight stitching and reverse sewing

Caution
Straight stitch
1
Turn the handwheel towards yourself to raise the needle.
2
Turn the pattern selection dial to choose the pattern.
Set the stitch length dial between "1" and "4".
Zigzag sewing
3
Position the fabric under the
presser foot, and then lower
the presser foot lever.
Step on the foot controller to
begin sewing.
End of sewing
After sewing, turn the handwheel toward
you to raise the needle to its highest
position, raise the presser foot, and then
pull out the fabric to the back.
Do not pull the fabric excessively while sewing.
Doing so could break the needle and cause an
injury.
foot
1~4
5 6
29