Using The Presser Foot Pressure Adjustment Knob; Using The Drop Feed Lever; Using The Stitch Length Dial - Toyota SP20 Series Instruction Manual

Before use

• Using the presser foot pressure adjustment knob

• Using the drop feed lever

• Using the stitch length dial

(Used also when sewing stretch stitches. For details on sewing stretch stitches, refer to
page 42.)
Equipped only with model XXX34
By turning the presser foot pressure adjustment
knob at the top of the sewing machine, the
amount of pressure applied by the presser foot
can be adjusted. Turning the presser foot pressure
adjustment knob toward "–" reduces the amount
of pressure applied by the presser foot.
For best results when sewing stretch or thin
fabrics, slightly reduce the pressure.
Normally, sew with the knob set to "3".
Equipped only with model XXX34
The feed dog can be lowered when feeding
the fabric freely by hand, for example, when
embroidering or quilting.
During normal sewing, move the lever to the
right to raise the feed dog.
When feeding the fabric manually, move the
lever to the left to lower the feed dog.
• Stitch length dial (0 through 4)
Turn the stitch length dial to adjust the stitch
length amount.
1. For shorter stitch, turn the dial to a lower
number.
2. For longer stitch, turn the dial to a higher
number.
11