Sewing
• Buttonhole sewing
Buttonhole sewing to match the size of the button is possible.
For stretch fabric or thin fabric, it is recommended to use a stabilizer for a better
buttonhole fi nish.
Caution
1
Change to the buttonhole foot.
(Refer to "Changing the presser foot", p23.)
Buttonhole foot
2
Set the buttonhole size and mark
lines on the fabric.
3
Align the buttonhole foot division line
closest to you with the guide line, and
lower the presser foot to the start line of
sewing on the fabric.
Before changing the presser foot, remove the
power plug from the outlet.
Not doing so could cause an injury.
Button thickness
(Button diameter + button thickness + 3 mm)
Division line
Guide line
0.4~1
1
2
3
4
Center line
3 mm
Start line
of sewing
Center line
Start line
of sewing
35