Toyota SP20 Series Instruction Manual page 30

Thread cutter on the presser bar
Line up the two threads, and then cut
them with the thread cutter on the
presser bar.
Reverse sewing
Reverse sewing is performed at the beginning and the end of sewing to prevent the
thread from unraveling.
Reverse sewing is performed while
pressing down the reverse sewing lever.
• Stitch 1 cm from the edge of the fabric
to prevent unraveling at the start of
sewing.
• Sew 3 to 4 reverse stitches at the end
of sewing.
Note: Remove your fi nger from the
reverse sewing lever to return
to forward direction sewing.
30
Thread cutter
Reverse sewing lever