Changing Light Bulb - Toyota SP100 Series Instruction Manual

Changing light bulb

Warning
Only use the lamp designed specifically for this sewing machine.
Not doing so could cause a fire.
Before changing the light bulb, use the main power switch to turn off
the sewing machine, remove the power plug from the outlet, and then
wait until the bulb cools.
Not doing so could cause a burn or electric shock.
1
Loosen the screw with a
+ screw driver of your
cover in the direction of
the arrow.
2
Turn the light bulb counterclockwise as
the arrow in the diagram and remove.
3
Turn the new light bulb clockwise to
install.
Note:
Use a light bulb with a maximum
power of 15 W.
The lamp can be purchased at
http://www.home-sewing.com.
Alternatively, contact your retailer.
4
Always reinstall the face cover after
replacing the light bulb.
46
Screw
Face cover