Sewing preparations
• Threading the upper thread
Caution
1
Turn the handwheel toward
you to raise the take-up
lever to its highest position.
The line on the handwheel
should be at the top, as
shown.
2
Raise presser foot lever.
Note: If the presser foot lever is not
raised, the upper thread cannot
be threaded correctly.
3
Pull up the spool pin.
4
Insert the felt, the thread spool and the
spool cap on the spool pin.
Note: The felt is already inserted on
the spool pin.
5
Pull the thread from the thread spool,
and then press the thread against the
sewing machine with one hand while
passing the thread around the thread
guide with the other hand, as shown in
the diagram.
18
Before threading the upper thread, remove the
power plug from the outlet.
Not doing so could cause an injury.
Spool pin
Take-up lever
Line
Presser foot lever
Felt
Thread guide