HP 300X - JetDirect Print Server Administrator's Manual page 84

Table 7.7 Apple EtherTalk Configuration Messages (2 of 2)
Message
PORT X STATUS:
Table 7.8 SNMP Messages
Message
SNMP SET CMTY
NAME:
NONE or SPECIFIED
SNMP GET CMTY
NAME:
ALL or SPECIFIED
84 HP Jetdirect Configuration Page Messages
Description
READY: Print server is awaiting data.
INITIALIZING: Print server is registering the node address
or name/type.
Description
Indicates whether or not an IP SNMP set community name
has been configured for the print server. This parameter is
omitted when the print server is configured from the
printer's control panel. NONE indicates that the print server
will not accept any SNMP community names for
SetRequests. SPECIFIED indicates that a specific SNMP
set community name is configured.
Indicates whether or not an IP SNMP get community name
has been configured for the print server. This parameter is
omitted when the print server is configured from the
printer's control panel. ALL indicates that the print server
will accept all SNMP community names for GetRequests.
SPECIFIED indicates that a specific SNMP get community
name is configured.
ENWW