HP 300X - JetDirect Print Server Administrator's Manual page 79

Table 7.3 Network Statistics
Message
UNICAST PACKETS
RCVD:
TOTAL PACKETS
RECEIVED:
BAD PACKETS RCVD:
FRAMING ERRORS
RCVD:
PACKETS
TRANSMITTED:
UNSENDABLE
PACKETS:
XMIT COLLISIONS:
XMIT LATE
COLLISIONS:
IPX/SPX RETRANS:
BAD LENGTH RCVD:
LOST FRAMES:
ENWW
Description
Number of frames specifically addressed to this
HP Jetdirect print server. This does not include
broadcasts or multicasts.
Total number of frames (packets) received by the
HP Jetdirect print server without error. This includes
broadcast, multicast packets, and packets specifically
addressed to the print server. This number does not
include packets specifically addressed to other nodes.
Total number of frames (packets) received by the
HP Jetdirect print server with errors.
Maximum of CRC (Cyclic Redundancy Check) errors and
framing errors. CRC errors are frames received with CRC
errors. Framing errors are frames received with alignment
errors. A large number of framing errors could indicate a
cabling problem with your network.
Total number of frames (packets) transmitted without error.
Total number of frames (packets) not successfully
transmitted because of errors.
Number of frames not transmitted because of repeated
collisions.
Total number of frames not transmitted because a late
collision occurred. A large number may indicate a cabling
problem on the network.
Number of retransmissions necessary because a remote
node did not acknowledge receipt of a frame sent to it.
Excessive retransmissions may degrade performance,
cause 40 ERRORS, or indicate developing network
hardware or congestion problems.
Total number of frames missed because they were too
long for the HP Jetdirect print server to receive.
Number of times the end of the frame could not be
detected while transmitting.
HP Jetdirect Configuration Page Messages 79