HP 300X - JetDirect Print Server Administrator's Manual page 56

Commands
Table 5.1 summarizes commands available to the user during an
FTP printing session.
Table 5.1 User Commands for HP Jetdirect FTP Server
Command
user <username>
cd <port#>
cd/
quit
bye
dir
ls
pwd
put <filename>
bin
ascii
Ctrl-C
rhelp
56 FTP Printing
Description
<username> specifies a user. Any user will be
accepted and can print to the selected port.
<port#> selects a port number for printing. For
HP Jetdirect single-port print servers, only port1 is
available. For multiport print servers, specify port1
(default), port2, or port3.
/ specifies the root directory of the HP Jetdirect FTP
server.
quit or bye terminates the FTP session with the
HP Jetdirect print server.
dir or ls displays the contents of the current
directory. If this command is typed in the root
directory, a list of available ports for printing is
displayed. For multiport print servers, the available
ports for printing are PORT1 (default), PORT2, and
PORT3.
Displays the current directory or the current Jetdirect
printing port.
<filename> specifies the file to send to the
selected HP Jetdirect print server port. For multiport
print servers, a different port can be specified in the
command: put <filename> <port#>
Configures an FTP binary (image) file transfer.
Configures an FTP ASCII file transfer. HP
print servers support only non-print format control for
character transfers (standard values for spacing and
margins are used).
Press the Ctrl and C keyboard keys simultaneously
to abort the FTP service command and any transfer
of data. The data connection is closed.
Displays the FTP commands supported.
Jetdirect
ENWW