HP 300X - JetDirect Print Server Administrator's Manual page 65

Table 6.1 External Print Server (2 of 2) Configuration Pages
Item Description
7 Apple EtherTalk status
information (Table 7.7)
8 SNMP Messages (Table
7.8)
Figure 6.2 Ethernet Configuration Page
(External Single Port Print Servers)
ENWW
Troubleshooting Information
(Ethernet only) If the AppleTalk protocol
is working properly, or if it is enabled.
Use NET and NODE to verify the printer
is communicating correctly on the
network. ZONE verifies you selected
the correct printer. P2 (below READY)
indicates you are using the Phase 2
EtherTalk protocol, which should be the
same on your printer as on your Mac
OS.
Provides SNMP community name
status.
Troubleshooting the HP Jetdirect Print Server 65