Lexicon PCM 90 - REV 1 User Manual page 60

PCM 90 User Guide
Assignable KeyWords
Acoustic
Medium
Ambience
MIDI
Ballad
Mono
Bright
Natural
Broadcast
Orchestral
Cascade
Outdoor
Chamber
Plate
Classical
RandomHall
Cncrt Hall
Room
Custom
Short
Dark
Slap FX
Dialog
Small
Drums/Perc
Spatial
Dynamic
Special FX
Echo
Splits
Film-ADR
Stereo
Gated
Surround
Guitar
Tempo
Indoor
Unnatural
Instrument
Vocal
Keyboard
User 1
Large
User 2
Live PA
User 3
Long
User 4
Mastering
2-42
LowLabel: The name you assign will appear on the bottom line of the display
when the control reaches the value you have set as the Low limit.
HighLabel: The name you assign will appear on the bottom line of the display
when the control reaches the value you have set as the High Limit.
MidLabel: The name you assign will appear on the bottom line of the display
when the control reaches the value you have set as the MidPoint. (This naming
display is not available if you have not assigned a MidPoint within the range
established by the Low and High Limits.)
LowRange: The name you assign here will be displayed whenever the control-
ler is between the MidPoint and the Low Limit.
HighRange: The name you assign here will be displayed whenever the
controller is between the MidPoint and the High Limit.
You can display numerical values anywhere along the bottom line of the display
by entering the characters @ or $ where you want values to appear. As many
as three digits can be displayed, representing absolute distance from the Low
Limit (@@@), or relative distance from the selected MidPoint ($$$). If the
MidPoint is at or below the Low Limit, this range will be equivalent to the entire
range of the controller. The default status of the label displays includes @@@
already entered at the beginning of the entry line. Check out the presets in the
Custom row of any bank for examples of Custom Controls.
Assigning KeyWords to an Effect
The last four positions of the Custom row allow as many as four KeyWords to be
assigned to the current effect. At each position (KeyWord 1-4), use ADJUST to
select a representative KeyWord from the list shown in the sidebar — or "none".
Effect sorting by KeyWord is accomplished in Control mode at location1.8. To
view the sorted list, repeatedly press either Program Banks or Register Banks
through all of the available banks, then to the KeyWord display. In Control mode,
A to Z is available as a viewing selection. All effects are internally tagged to allow
this option of alphabetical sorting.
Lexicon