Lexicon PCM 90 - REV 1 User Manual page 28

PCM 90 User Guide
Row 2
2-10
Card
2.0 Bank Copy
This control allows you to copy banks of effects from one location to another.
Banks can be copied internally, or to and from PCMCIA Memory Cards. Try, for
example, copying Preset Bank 0 into internal Register Bank R0.
1. Press Store. The following display will appear briefly.
Select and copy
effect banks
The display will then change to show:
Card Bank Copy
2.0 Src: P0 Dst: R0
The asterisk indicates that Src is available for adjustment. ADJUST will
scroll through all available banks, including internal preset and register
banks, as well as any banks on inserted cards. Internal banks are labeled
"P0...P4" and "R0, R1". Card registers will be labeled "C0, C1, C2" etc.
2. Press Load/
Card
2.0 Src: P0 Dst: R0
Now, use ADJUST to select the destination of your copy. Selecting a
register bank here will cause its contents to be erased and overwritten
with the bank you have selected as the source when Store is pressed.
4. Press Store to copy the selected source (in this case Preset Bank 0) into
internal Register Bank R0. The display will ask "Are you sure?" (Press
STORE). Press any button to cancel. Press Store to complete the store
operation.
2.1 Load
This control is provided for future enhancement. It will allow you to load audio
software from a Memory Card simply by inserting the new card and responding
to the display prompts.
to move the asterisk to Dst.
Bank Copy
Lexicon