HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual page 85

Server/CD-ROM
Access Rights
Setting Up the Network Time Protocol
An alternative to manual configuration is automatic time syn-
chronization using the Network Time Protocol (NTP, as defined
by RFC 1769). Set these configuration parameters:
Parameter Name
TimeSyncSource
NTPServer
Access restrictions are set individually for each protocol. If you
use other network protocols in addition to NFS, consult the other
chapters for setup of those protocols. (The default settings in
some protocols provide full access rights to all users, so we rec-
ommend that you disable all protocols not being used. If you do
not, a user accessing the server through such a protocol may be
given full access rights, regardless of the security configurations
in other protocols.)
The HP CD-ROM server can be configured to restrict user access
to CD-ROM drives, to individual CDs, and to the server configu-
ration. You can limit the number of users simultaneously access-
ing any CD to comply with user-license restrictions. And we
recommend that you restrict access to the config and volumes
directories on the server.
For general access-control options not explained here, see the
description of the access rights starting on page 7-5. If you use a
web browser for configuration, one of the options described later
in this section, online Help is available to you for explanation.
Value Description
(a general server parameter) to set
NTP
Network Time Protocol
(an IP parameter) IP address or
For example:
Internet domain name of a server
192.4.2.30
to supply the network time.
Setup for UNIX Networks (NFS) 6-5