HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual page 126

9-16 Troubleshooting
The server/tower is now reset to factory-default settings and
should automatically restart. If it fails to restart, try switching
the power off, waiting 10 seconds, and then switching on the
power again.
Using a Text Editor
1. Locate and open the server's config.ini file using a text
editor (for example, Windows Notepad).
2. Change the FactoryDefaults parameter from no to yes.
3. Save the file.
This writes the contents of the file to the server and resets it to
factory defaults.
The server/tower is now reset to factory-default settings and
should automatically restart. If it fails to restart, try switching
the power off, waiting 10 seconds, and then switching on the
power again.
Using the Recessed Push Button
1. Switch off the server/tower (using the switch on the front).
2. On the back of the tower, next to the network connector, a push
button is recessed behind a small hole. Insert a narrow
implement, such as a paper clip, into the hole to push and hold
the button while you switch on power to the tower (using the
switch on the front). Continue to press the button until the
Network indicator flashes at regular two-second intervals.
3. Release the button and wait at least two seconds (one flash of
the Network indicator).
4. Press and hold the button again for at least five seconds until
the Network indicator remains constantly on.
The server/tower is now reset to factory-default settings and
should automatically restart. If it fails to restart, try switching
Push button