Setup for Novell Networks
This chapter describes the setup for Novell networks running
NCP (NetWare Control Protocol). The HP SureStore CD-ROM
server supports NCP transported over IPX and/or NetWare/IP.
The Novell network products could be NetWare 3.x, 4.x, or
Intranetware. Clients using NCP could be running Windows 95
or 98, Windows NT, Windows for Workgroups, OS/2, or DOS.
This chapter includes examples of procedures for many such
installations. You may need to refer to your network operating
system manuals for assistance with specific procedures for some
client systems.
If you are running TCP/IP on your network as well as Novell
products, refer to chapter 3 to assign the IP address to the server
(the "Set the IP Address for the Server" section from page 3-1 to
page 3-8) before granting access to clients.
Following that section of chapter 3 are instructions for
accessing the CDs and configuring the server by using a web
browser. For IP and HTTP installations, we recommend use
of those instructions for client access and configuration in
addition to the methods following in this chapter 5.
Setup for Novell Networks 5-1
5
Need help?
Do you have a question about the J3278B - SureStore CD-ROM Server/Tower 7 NAS Server and is the answer not in the manual?
Questions and answers