HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual page 110

CAUTION!
8-2 Upgrading the Firmware
Follow the steps below to install new CD-ROM server firmware:
1. Obtain a copy of the firmware update file from your
HP-authorized dealer or from HP's Electronic Support
services.
2. Login to the CD-ROM server using the command:
ftp <IP-address/host-name>
where <IP-address/host-name> is either the IP address
or the host name assigned to the CD-ROM server.
3. You will be prompted for user ID and password. Use the user
ID root, which has the default password pass. (root is the
user ID with the highest priority.)
4. Issue the command bin to change to binary transfer mode.
5. Issue the command:
put <filename> flash
where <filename> is the name of the new server firmware
(for example, hpcd_411.bin).
Be careful not to interrupt the file transfer. If the transfer is
interrupted, the CD-ROM server may become inoperative
and must be returned to HP.
6. Wait for the transfer to complete. This normally takes 1 to 4
minutes. The server will then automatically restart with the
new CD-ROM server firmware.
7. Log out using the command quit, bye, or exit, depending on
your FTP version.
8. Cycle power to the server.
With the new firmware operating, your password for root
reverts to the original setting pass.
Instructions on how to install your CD-ROM server firmware are
also supplied with the firmware update.