HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual page 78

Note
5-18 Setup for Novell Networks
To Use NetWare/IP Only.
You can disable the IPX protocol on the server:
1. Set the following CD-ROM server configuration parameter
for NetWare:
Parameter Name
NWEnable
2. After restarting the server, set the following CD-ROM server
configuration parameters for NetWare:
Parameter Name
InternalNetAddress
ServerName
3. Restart the server again, and wait 5 minutes.
The server will then be accessible to the clients that support
the NetWare/IP protocol.
If the clients cannot then access the server, then do the
following:
a. Switch off the power to the server.
b. Wait 20 minutes for the SAP table to be flushed.
c. Switch on power to the server.
d. Wait 5 minutes for the server to be visible. All NetWare/IP
clients should now be able to access the server.
Value
no
Value
Internal network address
Hexadecimal string that is unique on
the network, following Novell guide-
lines.