HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server User Manual page 46

Note
4-4 Setup for Microsoft Networks (SMB)
8. This maps the administrative root access to the server. If you
wish to use this root access for the same drive letter the next
time you start your computer, check Reconnect at Logon. (If
you wish to select another level of mapping, see step 10 below.)
9. Click the OK button. The server is now ready for use.
10. Optional: If you have other SMB domains or workgroup names
defined and the server did not appear within them, you now
can use this client to edit your server configuration to change
the parameter Domain/GroupName to the name of your
existing domain or workgroup. See page 4-12.
If you wish to map the server to a different level than
root level (as described in step 12 below), you can then
return to step 1 of the procedure above to redo the
mapping as desired.
11. Double-click the entry for your new server. The default entry
name is HP hhhhhh , where hhhhhh are the last six digits of the
server's LAN hardware (MAC) address.
The individual CDs are shown as well as the cd folder that
contains them. This is not the normal hierarchical appear-
ance, but it is done this way to give you the choice of mount-
ing either individual CDs or all of them together.
If the SMB configuration parameter ShowAllShares has
been set to no (see chapter 7), the only files you will see are
the CDs.
12. To map a resource to a drive letter, right-click one of the fol-
lowing server resources:
• For root access, right-click root.
• For cd folder access, right-click the cd folder.
• For CD-ROM access, right-click the specific CDROM
folder name.
13. From the pop-up menu, select Map Network Drive.