Home" Channel Memory - Yaesu FT-847 Operating Manual

MEMORY OPERATION
"H " C
OME HANNEL
Four special one-touch H
"split" frequency/mode data may be stored in the H
for HF (any frequency between 1.8 and 29.7 MHz), 50 MHz, 144 MHz, and 430 MHz.
•
Set the Main VFO to the frequency which you wish
to store into the H
mode, bandwidth, and other conditions are set the
way you want them.
‚
Press the [MCK/W] key for ½ second.
ƒ
Now press the [HOME] key for ½ second. This
stores the frequency data into the H
location.
„
If you wish to store a "Split" frequency pair into
the H channel, store the Receive frequency in
OME
• ƒ
steps ~ above. Now set the Main VFO to the
desired Transmit frequency.
...
Once more, press the [MCK/W] key for ½ second.
†
Press and hold in the microphone's [PTT] switch;
while holding in the [PTT] switch, again press the
[HOME] key for ½ second. This stores the Trans-
mit frequency data into the H
‡
To recall the H
OME
key momentarily (while operating either in the VFO
or Memory mode). The "H " indication will appear
in the memory channel number field to the right of
the main frequency display area. Press the [HOME]
key once more to return to the previous frequency
(either a VFO frequency or a memory channel).
74
M
AIN
M
EMORY
channels are available, for special frequencies you use often. Either "simplex" or
OME
memory. Be sure that all
OME
channel
OME
channel location.
OME
channel, just press the [HOME]
M S
EMORY YSTEM
channel locations. Separate H
OME
channels are available
OME
FT-847 O
PERATING
M
ANUAL