Menu System - Yaesu FT-90R Operating Manual

Menu System

The FT-90R's M
to be custom-configured for your operating requirements.
The M is easy to activate and set, using the following procedure:
ENU
1. Press and hold in the
2. Rotate the M
3. Press the
adjust the status or value of the M
above the
the one which should be pressed to toggle the available selections.
4. After completing your adjustment, press and hold in the
second to save the new setting and exit to normal operation.
M items are conveniently arranged in alphabetical order.
ENU
Menu Item
01ALPH Enable/disable the Alpha-Numeric display
02ALPHc Store Alpha-Numeric "Tags"
03APO Set the Automatic Power-Off time
04 Not Used
05ARTS Select the ARTS mode
06BEEP Enable/disable the key-button beeper
07CWID Enable/disable the CW IDer during ARTS operation
08CWID# Programming the CW IDer
09D Con Setting the front panel display's contrast level
10D Dim Setting the front panel display's illumination level
11DC IN Indication of the Supply Voltage
12DCS# Setting the DCS code
13DCS Activate the DCS Code Search Scanner
14DCSnr Select "Normal" or "Inverted" DCS code
15DTMFd Setting the DTMF Autodialer delay time
16DTMFs Setting the DTMF Autodialer sending speed
17DTMFw Programming the DTMF Autodialer
18FAN Set the cooling fan function
19LckTX Enable/disable the PTT lock
52
system allows a number of transceiver operating parameters
ENU
key for one second.
D
knob to select the M
AIN IAL
or key, as instructed in the sections to follow, to
key will show a "q" icon, indicating that the key below it is
Function
item to be adjusted.
ENU
item. In many cases, the LCD field just
ENU
TRX NOR/RX REV
TX REV/TRX REV
FT-90R O
key for 1.5
Available Values Default
ON/OFF
-----
OFF/1~12
-----
OFF/RX/TX/TRX
ON/OFF
ON/OFF
-----
0~12
OFF/d1/d2/d3/d4
-----
104 standard
DCS codes
-----
TRX NOR
50/250/450/
750/1000
50/100
-----
OFF, AUTO, TX
AUTO/TX
AUTO/TX
OFF/
BAND A/BAND B
M
PERATING ANUAL
OFF
-----
OFF
-----
OFF
ON
ON
-----
6
d1
-----
023
-----
450
50
-----
OFF