Table of Contents
Advertisement
Figure 12 Example of use
130003/D
Note
In the case of tapping through holes it is important that the
profile of the
Emuge self-lock
compared with the entering direction of the bolt.
Use
gauges. Note that the gauge must be used
Emuge self-lock
in the correct direction.
Self-lock taps provided by Simrad
The following self-lock taps are on stock at Simrad, and can be
ordered from us.
Threads
M6
M8
M10
M12
M16
Supplier and manufacturer
Norwegian supplier is:
Tingstad AS, P.O.Box 83, Kalbakken, 0902 Oslo, Norway
http://www.tingstad.no
Manufacturer is:
EMUGE-Werk Richard Glimpel, Nurnberger Strasse 96-100,
D-90607 Lauf, Germany
http://www.emuge.de
Transducer handling and maintenance
threads is in the correct direction
Drill diameter for
threads
ø5.2
ø7.0
ø8.8
ø10.7
ø14.5
Part.no
700-078838
700-078531
700-078408
700-078409
700-078410
27
Advertisement
Table of Contents
