Table of Contents
Advertisement
Document history
Simrad document number: 130003 / ISBN-13: 978-82-8066-111-1 / Current revision: D
Rev.A
—
Rev.B
01.09.1991
Rev.C
02.10.2009
Rev.D
16.11.2009
Copyright
©2009 Kongsberg Maritime AS
The information contained in this document remains the sole property of Kongsberg Maritime AS. No part
of this document may be copied or reproduced in any form or by any means, and the information contained
within it is not to be communicated to a third party, without the prior written consent of Kongsberg
Maritime AS. The document, or any part of it, may not be translated to any other language without the
written approval from Kongsberg Maritime AS.
Disclaimer
Kongsberg Maritime AS endeavours to ensure that all information in this document is correct and fairly
stated, but does not accept liability for any errors or omissions.
Warning
The equipment to which this manual applies must only be used for the purpose for which it
was designed. Improper use or maintenance may cause damage to the equipment and/or injury
to personnel. The user must be familiar with the contents of the appropriate manuals before
attempting to install, operate or work on the equipment.
Kongsberg Maritime AS disclaims any responsibility for damage or injury caused by improper
installation, use or maintenance of the equipment.
Support
If you require maintenance or repair, contact your local dealer. You can also contact us using the following
address: contact@simrad.com. If you need information about our other products, visit our web site. On
the web site you will also find a list of our dealers and distributors.
First version. Common for transducers 38–7 and ES38B.
Updated. Common for transducers 38–7 and ES38B.
Improved. Valid only for Simrad 38–7.
Support bar description changed, must be installed. Added
drawing Support bar [206574] on page 39.
Advertisement
Table of Contents
