Enable Address Book; Control Max Length Of Encryption Keys - Ricoh Aficio MP 2352SP Administrator's Manual

2 SafeCom Go Ricoh
Address Book buttons are shown on the device's touch screen in the Send to
Fax. Click Show. (3.1.5).

2.8.13 Enable Address Book

SafeCom Go Ricoh can use the Ricoh Address Book with E-mail (3.1.5) and Send
to Fax (3.1.6).
1. Open the Configuration web page (2.7.3).
2. Scroll to the Address Book section at the bottom of the page.
3. Enter User name and Password of the administrator of the Ricoh MFP.
4. Click Apply.
Note: Refer to the documentation l that came with the Ricoh MFP in order to
learn how to build and maintain the Address Book.
Note: Address Book support is NOT available on Type B models.

2.8.14 Control max length of encryption keys

1. Open the Configuration web page (2.7.3).
2. Scroll to the Encryption section at the bottom of the page.
3. Asymmetric key max length can be: Default, 512, 1024 or 2048.
Symmetric key max length can be: Default, 128 or 256.
4. Click Apply.
Choose Default to leave it to the device to decide if it has sufficient processing
power and memory to comply with the length of the encryption keys that has
been specified on the Encryption tab in the Server properties dialog of the
SafeCom G3 server.
SafeCom control data to and from the device is always encrypted. Pull printed
documents are sent encrypted to the device only if Encryption is checked in
the Device properties dialog and if the user has Encrypt documents checked
on the Settings tab in the User properties dialog. Otherwise print data is NOT
encrypted.
1
Skip this section if you use the SafeCom G2 server.
D60703-16
1
42