Resend Configuration; Register Device - Ricoh Aficio MP 2352SP Administrator's Manual

2 SafeCom Go Ricoh
4.
2.8.3

Resend configuration

If a device added in the SafeCom Administrator is not configured correctly, or if
the device must be reconfigured to a different server, it is possible to resend
configuration details (Server address and Group name) to the device.
1. Browse to Devices in the SafeCom Administrator.
2. Right-click the device and click Resend configuration.
The configuration details are now sent to the device and the configuration is
successful when Server is reconfigured appears.
Note: The Resend configuration functionality does not work with devices that
are SafeCom enabled via the device server.
2.8.4

Register device

1. Open the Register web page.
2. Enter the User logon and PIN code of a user with Technician or
Administrator rights. The user must have a PIN code.
3. Click Register.
Once the device is registered it appears in SafeCom Administrator. The device
can also be registered with the SafeCom solution when:

Using the Add device function in SafeCom Administrator.

Login at the device if the user has Technician or Administrator rights.
D60703-16
If the SafeCom server has multiple IP addresses there will be an entry
for each. If the SafeCom server is clustered you must ensure that it is
only the entry matching the IP address of the virtual server and not
the nodes.
In a multi server solution click Move up and Move down to prioritize
the order in which the servers are contacted in case the first one on
the list becomes unavailable.
If the device is added via SafeCom Administrator the list of SafeCom
servers will include the list of prioritized failover servers. For
additional information about failover servers refer to SafeCom G3
Administrator's Manual D60603
If broadcasting fails you may have to directly enter the IP address in
Add server and click Add.
Click Apply.
Note: After you click Apply, it takes one minute before the new
SafeCom Server settings take effect. Wait, otherwise there may be a
login error at the printer.
35