2 SafeCom Go Ricoh
2.3
Increase Heap and Stack sizes on Ricoh device
On Ricoh Type C, F, H, I, J, K, L, N and O
1.
Open a web browser and enter the printer's address.
Use of JavaScript (Active Scripting) must be enabled.
2.
Click Login and enter Login User Name (admin) and Login Password (by
default there is no password) and then click Login.
3.
Click Configuration on the left menu.
4.
Under Extended Feature Settings click Administrator Tools.
5.
Change Heap Size to 16 MB.
6.
Change Stack Size to 64 KB.
7.
Click Apply.
8.
Restart the printer.
On Ricoh Type B:
1.
On the printer tap Menu to open Application Manager.
2.
Tap Login. Tap the # button to login. If a password has been set then
enter it and tap #.
3.
Tap the Option tab.
4.
Tap heap/stack size setting.
5.
Tap Heap Size and change value to 16 MB. Tap #.
6.
Tap Stack Size and change value to 64 KB. Tap #.
7.
Tap Setting.
8.
Restart the printer.
Proceed to section 2.4.
D60703-16
17