Enable Single Sign-On For Nuance Digidocflow; Enable Single Sign-On For Nsi Autostore - Ricoh Aficio MP 2352SP Administrator's Manual

2 SafeCom Go Ricoh

2.8.15 Enable single sign-on for Nuance DigiDocFlow

1. Open the Advanced web page (2.7.10).
2. Enter Computer IP address and Port (default 21) of the computer hosting
the Nuance DigiDocFlow solution.
3. Enter User name and Password required to access the Nuance
DigiDocFlow solution. The External authentication section is only used
for NSi AutoStore (2.8.15). Leave Enable unchecked.
4. Click Apply.

2.8.16 Enable single sign-on for NSi AutoStore


From SafeCom obtain the file scNotifyExtAuth.dll.

From NSi AutoStore obtain the client
Note: Both SafeCom server and AutoStore MUST be in the same domain
SafeCom service MUST be started by a user with remote access rights on the
AutoStore server.
The steps below need to be repeated on each SafeCom server:
1. Run the ASEQAT.exe as administrator and enter the IP address of the
AutoStore Server. After installation you should see a new service called
ASEQAT.
2. Stop the SafeCom Service and copy the scNotifyExtAuth.dll into the
SafeCom installation folder.
3. Right-click SafeCom Service and click Properties.
4. Click Log on tab and click This account. Enter the name and password of
an account that has remote access rights on the AutoStore server.
5. Click OK.
6. Restart the SafeCom Service.
Note: The SafeCom Service loads the IP address of the AutoStore server when
it is started. This implies that a change of the AutoStore server's IP address
should be followed by a restart of the SafeCom Service.
The steps below need to be performed on the Ricoh device:
1. Increase the Heap Size on the Ricoh device to about 24 MB (2.3).
2. Open the Advanced web page (2.7.10).
3. Check Enable under External authentication. Leave all other fields at
their default.
4. Click Apply.
2
The client package is generic in nature, but is most likely known as ‖AutoStore
EquiTrac Client‖.
3
At this point in time no testing has been performed with trusted domains.
D60703-16
2
package that contains ASEQAT.exe.
3
.
43