Register Card With Windows Logon; Register Card With Puk Code - Ricoh Aficio MP 2352SP Administrator's Manual

3 Using SafeCom Go Ricoh

3.1.10 Register card with Windows logon

1. Use card reader.


2. Tap User name and enter User name on the touch-screen. Tap OK.
3. Tap Password and enter Password on the touch-screen. Tap OK.
4. Tap Domain and enter Domain on the touch-screen. Tap OK.
The solution can be configured to NOT prompt for the domain (2.8.8).
5. Tap Login.
Note: User name and Password cannot be blanks.

3.1.11 Register card with PUK code

1. Use card reader. If the card is unknown and there is an available PUK
code in the SafeCom system the user is asked to enter his PUK code.
2. Enter PUK code on the keypad or touch-screen.
3. Tap PIN code and enter PIN code on the keypad or touch-screen.
4. Tap PIN again and enter PIN again on the keypad or touch-screen.
The card is now registered with the user.
D60703-16
If there are any available PUK codes on the system tap Cancel in the
Please enter PUK dialog. The Login to register card dialog appears.
If there are NO available PUK codes the user gets the Login to
register card dialog. To abort the registration of the card tap
Cancel in this dialog.
56