Download Print this page

Tyger RIDER TG-SS2F35058 Manual

3.5" rider running boards

Advertisement

Quick Links

TYGER RIDER
BEFORE INSTALLATION
READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. REMOVE
CONTENTS FROM BOX AND VERIFY ALL PARTS ARE PRESENT. FAILURE TO
IDENTIFY DAMAGE BEFORE INSTALLATION COULD LEAD TO A REJECTION OF
ANY CLAIM. IF MISSING PARTS OR ANY DAMAGE FOUND, PLEASE TAKE A
PICTURE FOR THE CLAIM PURPOSE. TO FILE YOUR CLAIM, PLAESE VISIT:
WWW.TYGERAUTO.COM/CONTACT
TORQUE VALUES
Fastener Size
Class 8.8 Torque (ft-lbs)
6mm
8mm
10mm
12mm
14mm
Front
®
®
®
TG-SS2F35058
Class 10.9 Torque (ft-lbs)
6-7
15-16
31-32
54-55
87-88
125-126
(6) Mounting Brackets
(for left or right sides)
Driver/Left
Sidebar
Customer Support: www.TygerAuto.com/Contact
Parts List
x1
x1
x6
x18
x12
x18
x18
6-7
22-23
44-45
78-79
(18) Plastic Isolator
Washers
Arrows indicate location of threaded
inserts in bottom of Sidebar
1/3
Driver/Left Sidebar
Passenger/Right Sidebar
Mounting Brackets (left or right)
8mm Plastic Isolator Washers
8mm x 25mm Combo Bolts
8mm x 24mm OD x 2mm Flat Washers
8mm Nylon Lock Nuts
V210225

Advertisement

loading
Need help?

Need help?

Do you have a question about the RIDER TG-SS2F35058 and is the answer not in the manual?

Questions and answers

Summary of Contents for Tyger RIDER TG-SS2F35058

  • Page 1 TYGER RIDER ® ® ® Parts List TG-SS2F35058 Driver/Left Sidebar BEFORE INSTALLATION Passenger/Right Sidebar READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. REMOVE CONTENTS FROM BOX AND VERIFY ALL PARTS ARE PRESENT. FAILURE TO Mounting Brackets (left or right) IDENTIFY DAMAGE BEFORE INSTALLATION COULD LEAD TO A REJECTION OF ANY CLAIM.
  • Page 2 NOTE: REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY. ASSISTANCE IS RE- COMMENDED. (3) Plastic Insulation Washers STEP 1 Start the installation under the driver/left side of the vehicle. Locate the front factory running board mounting location along the inner side of the body (Fig 1).
  • Page 3 STEP 9 STEP 5 Do periodic inspections to the installation to make sure that all Select the driver/left Sidebar. With assistance, carefully place the hardware is secure and tight. Sidebar onto the (3) Brackets. DO NOT slide or twist the Sidebar on the Brackets or it may become damaged.