Misc; Changing Lcd Osd Settings - Raritan TMCAT17 series User Manual

Chapter 6: LCD Panel Operation

Changing LCD OSD Settings

60

Auto Adjust: Fine tune the video signal to eliminate waviness and
distortion. The "Auto Adjusting" message is displayed during the
process.

H Position: Align the screen image left or right.

V Position: Align the screen image up or down.

Phase: Adjust the phase setting.

Clock: Adjust the clock setting.

Misc

This submenu provides other OSD or screen settings, and the reset
function.

Language: Select the language in which the LCD's OSD interface is
displayed.

OSD Position: Determine the position of the LCD OSD on the screen.

Display Mode: Adjust the LCD display's video resolution.

OSD Time: Set the time duration in seconds that the LCD OSD is
visible after the last time any button of the LCD controls is pressed.

Ratio: Adjust the screen image's ratio.

Reset: Restore the LCD OSD settings to factory defaults.
Follow this procedure to change the settings on the LCD OSD menu.
To change the OSD settings:
1. Press . The LCD OSD menu appears.