Establish A Connection; Note To Commandcenter Users - Raritan DOMINION KSX User Manual

C 2: I
HAPTER NSTALLATION

Establish a Connection

Immediately upon double-clicking on the entry corresponding to your Dominion KSX unit, found
on the left-hand side of Raritan Remote Client (RRC), Dominion KSX will request your user
credentials. Log on with the default username and password (admin/raritan). You will
immediately be connected to your Dominion KSX unit. Use the RRC Navigator, found on the
left-hand side of the RRC window, to select and connect to a port.
The RRC Navigator displays
any known Raritan
networked appliances in a
single view.
Select Connection New
Profile to create new entries.
Double-click on RRC works with many
any serial or different Raritan IP-based
KVM port to products, each of which may
establish access to be configured remotely by
and control of the double-clicking on the
device attached. "Admin" port.

Note to CommandCenter Users

If you are using Dominion KSX in a CommandCenter configuration, perform the installation
steps as outlined above. After completing the steps in this chapter, please consult the
CommandCenter user guide to proceed with your installation. The rest of this user guide applies
primarily to users deploying Dominion KSX unit(s) without the integration functionality of
CommandCenter.
Click on The RRC Toolbar
"Synchronize provides easy access
Mouse" to converge to RRC's most
the mouse pointers frequently utilized
displayed in KVM features.
windows.
RRC provides
VT100 console
access to devices
connected to the
Serial Ports of
Dominion KSX.
If a Raritan Remote Power Control
Unit is attached to Dominion KSX,
double-click on "PowerPort" in the
RRC Navigator to invoke the
graphical power control interface.
The RRC Status When connected to a
Bar provides real- KVM console port,
time information keystrokes and video
on connection signals are transmitted in
parameters. real-time — exactly as if
you were situated locally.
17