Establishing A New Connection - Raritan DOMINION KSX User Manual

C 3: R R C
HAPTER ARITAN EMOTE
DNS Name: If you have configured your DNS server to resolve a DNS name to the IP
address that you have assigned to your Raritan device, you may use this DNS name to access
your Raritan device.
For a Dial-Up Connection, enter the dialing parameters that RRC should use to establish a
connection:
Phone Number: Be sure to include any additional codes that RRC should dial to establish a
connection, such as country codes, area codes, outside line access codes, etc.
Modem: Select the modem, as configured in Windows, that RRC should use to dial and
connect to your Raritan device.
Select a TCP Port to use:
Use Default Port Number: Dominion KSX is configured by default to use TCP Port 5000
for communicating with RRC. Dominion KSX can be configured to use a different TCP Port
(see Chapter 4: Administrative Functions, Network Configuration); if so, uncheck the Use
Default Port Number option, and enter the configured TCP Port to be used.
Compression Tab
Settings in the Compression Tab are adjustable via the RRC client, and therefore are not
necessary for pre-configuration in the Connection Profile. Should you wish to pre-configure these
settings, however, refer to the section in this chapter labeled "Remote Desktop: KVM Console
Control, Connection and Video Properties."
Security Tab
If you have configured your Dominion KSX unit to use a private group key, you must enter it
here in order to be authorized to initiate a connection with that Dominion KSX unit. Click OK
when you are finished.
When you have completed the Connect and Security screens, click OK to finish creating the
connection.

Establishing a New Connection

To connect to a Raritan networked device, double-click on its entry in the RRC Navigator. You
will be asked to authenticate to the device.
Note: The default Dominion KSX login user name is admin, with the password raritan. This user
has administrative privileges. Passwords are case sensitive and must be entered in the exact case
combination in which they were created.
The default password raritan must be entered entirely in lowercase letters.
To ensure security, change the default username password as soon as possible.
(RRC)
LIENT
25