Poe Module Status Led; Interface Card Status Led; Hot Swappable Power Modules - H3C S5800-32F Installation Manual

Table 1-19 OAP card status LED description
Mark
SLOT3

PoE Module Status LED

The S5800-60C-PWR provides a PoE module status LED (SLOT4) on its front panel. For details, refer
to Table 1-20.
Table 1-20 PoE module status LED description
Mark
SLOT4

Interface Card Status LED

Among the S5800 series switches, the S5800-32C, S5800-32C-PWR, S5800-56C, and
S5800-56C-PWR provide an interface card slot on the rear panel. You can view the interface card
status LED on the front panel of the switch to determine the status of the interface card. For details, see
Table 1-21.
Table 1-21 Description of the interface card status LED
Mark
SLOT1

Hot Swappable Power Modules

The S5800-60C-PWR and S5800-32F adopt hot swappable power modules.
module models and the specifications. You can purchase DC or AC power modules as needed.
Status
Green
Flashing yellow (1 Hz)
Off
Status
Green
Flashing yellow (1 Hz)
Off
Status
Green
Flashing yellow (1 Hz)
Off
Description
The OAP card is in the slot and operates normally.
The inserted OAP card type is incorrect or the OAP card
fails.
No OAP card is installed.
Description
The PoE module is in the slot and operates normally.
The inserted PoE module type is incorrect or the PoE
module fails.
No PoE module is installed.
Description
The interface card is in position and operates normally.
The inserted interface card type is incorrect or the
interface card fails.
No interface card is installed.
1-23
Table 1-22 lists the power