H3C S5800-32F Installation Manual page 24

Transceive
r/Cable Transceiver/Cable
type
SFP-XG-SX-MM850-A
10 GE SFP+ SFP-XG-LX220-MM13
transceiver
10
SFP-XG-LX-SM1310
LSWM1STK
Short-haul
10 GE SFP+
LSWM2STK
cable
LSWM3STK
You are recommended to use SFP and SFP+ transceivers of H3C on the S5800 series.
The types of SFP and SFP+ transceivers may update with time. For information about transceivers,
contact H3C technical support or marketing staff.
For the models and specifications of each kind of transceivers, refer to H3C Low End Series
Ethernet Switches Pluggable Modules Manual.
The S5800 series support the Intelligent Resilient Framework (IRF) feature, where physical
connections are required among members. You can use SFP+ cables to connect the SFP+ interfaces.
SFP+ cables support the SFP+ standard and use 10 G SFP+ Cu standard cables.
H3C provides three types of SFP+ cables with various lengths. See
Figure 1-15 for the appearance.
Figure 1-15 SFP+ cable
(1) Connector
Central Connect
wavelength or
850 nm
LC
1310 nm
— —
(2) Handle
1-16
Fiber
50/125 µm
300 m
multimode optical
(984.3 ft.)
fiber
62.5/125 µm
220 m
multimode optical
(721.8 ft.)
fiber
9/125 µm single 10 km
mode optical (about 6.2
fiber mi)
0.65 m
(2.1 ft.)
1.2 m (3.9
SFP+ cable
ft.)
3 m (9.8
ft.)
Table 1-6 for the specifications and
Max
transmis
sion
distance