H3C S5800-32F Installation Manual page 86

Figure 5-7 Send the application file using XMODEM
7) Update the Boot ROM file on the switch
After the Boot ROM file is downloaded, the terminal displays the following information:
Loading ...CCCC Done!
Will you Update Basic BootRom? (Y/N):Y
The system asks you whether you want to update the basic Boot ROM section. Click Y and then the
system displays the following information after the update is completed.
Updating Basic BootRom...........Done!
Updating extended BootRom? (Y/N):Y
The system asks you whether you want to update the extended Boot ROM section. Click Y. Then the
system displays the following information after the update is completed:
Updating extended BootRom.........Done!
Please change the terminal's baudrate to 9600 bps, press ENTER when ready.
8) Restore the download rate to the default
Set the baud rate to 9600 bps (refer to
detailed operation).
If you select 9600 bps as the download rate, skip this step, that is, you do not need to modify the baud
rate of the HyperTerminal.
9) Restart the switch to make the updated Boot ROM file effective
Press any key to return to the Boot ROM update menu.
1. Update full BootRom
2. Update extended BootRom
Change the rate of the serial port on the terminal
5-10
on page 5-6 for